Bell & Ross BR-X2 SKELETON TOURBILLON MICRO ROTOR Mode D'emploi page 5

BR-X2 SKELETON TOURBILLON MICRO-ROTOR
BR-CAL.381
GENERAL DESCRIPTION
Calibre: BR-CAL.381. 31 jewels. 21,600 vibrations per hour. Movement
allows automatic winding of the watch thanks to the movements of the wrist. It has been miniaturised to reduce the thickness of
the movement, and hence the watch. Power reserve of approximately 50 hours. High precision setting to 6 positions (tolerance of
0/+8 seconds per day). : hours and minutes. Flying tourbillon at 6 o'clock.
Functions
GENERAL USAGE
When the watch has stopped (crown in position 0): wind the movement by rotating the crown clockwise.
Starting the watch.
After approximately 40 rotations, the watch is fully wound (the winding mechanism does not have a stop to prevent overwinding).
The power reserve is approximately 50 hours when fully wound. When the watch is worn , the automatic mechanism will wind the
movement. Setting the time. Pull the crown out to position 1. Set the time by rotating the crown in the required direction.
IMPORTANT
Magnetic fields. Magnetic fields can adversely affect the accuracy of your watch. Also, we would recommend that you avoid
placing your watch near electronic devices that may generate large magnetic fields (radio, smartphone, television, computer, tablet,
loudspeakers etc.).
Water resistance. Once the watch is set, to ensure perfect water resistance, push the crown back to position 0. Never operate the
crown underwater.
: the 4 slotted screws (D) secure the crystal and back to the case and ensure the water resistance of the watch. To benefit from
Note
the Bell & Ross warranty, these screws must never be unscrewed.
: extra-thin mechanical with automatic winding. The rotor
: diameter 42.5 mm. : 9 mm.
Case Thickness
MAINTENANCE
After being immersed in seawater, it is recommended to carefully rinse off the watch and strap with fresh water.
It is also recommended to have the water resistance of your watch checked every two years.
INTERNATIONAL WARRANTY
To benefit from your 2-year international warranty, your card must be activated at the time of purchase by your
approved Bell & Ross point of sale, and presented every time an intervention is performed. You can now access
the digital version of this card and all the information relating to your watch by scanning the QR code or visiting:
www.bellross.com/warranty
To ensure a service that meets the brand's exacting standards, any servicing of your watch must be carried out
by the Bell & Ross service centre or a watchmaker approved by Bell & Ross.
A
B
C
D
A. Minute hand
B. Hour hand
C. Tourbillon cage
D. Attachment screw
(NEVER UNSCREW)
E. Crown
0. Wind the movement
manually (rotate
clockwise)
0 1
Set the time (rotate in
1.
E
either direction)