KTM 28514926066 Instructions page 29

–
Join the turn signal plug-in connector on the right
on the left
–
Route connector and cables without tension and secure
with cable ties.
Guideline
Do not bend, pinch or damage the cables.
502797-01
–
Latch each half of license plate bracket into place in
B
area and hook in the tail light in areas
–
Join the the license plate holder halves.
502798-01
–
Mount and tighten screws
Guideline
Screw, license plate
holder
–
Position the license plate holder.
–
Mount and tighten screws
Guideline
Screw, license
502799-01
plate holder
Final steps
–
Check that the lighting is functioning properly.
cm
.
bq
.
M5 5 Nm (3.7 lbf ft)
bp
.
M6 10 Nm (7.4 lbf ft)
ASSEMBLY 5
cl
and
C
.
Loctite ® 243™
13