Horizon Global 76928 Instructions D'installation page 7

2c.) Using a flat head screwdriver, remove (3) plastic push-pin rivets from
2b.) Using a flat head screwdriver, remove (1) plastic push-pin rivet from the
outer bottom edge of fascia near driver side wheel well.
top driver side wheel well. Repeat for opposite side.
2d.) Using a Philips screwdriver, remove (2) screws from bottom of driver side
2e.) Using a 10mm socket, remove (2) screws from splash guard, located on
mud flap. Repeat for opposite side.
drivers' side. Return to owner
©2022 Horizon Global Americas Inc. - Printed in Mexico Sheet 7 of 30 76928NP 8/15/22 Rev. A