Horizon Global 76928 Instructions D'installation page 6

1. Remove taillights/fascia hardware – Open tailgate. Using a 10mm socket, remove (2) screws from driver side taillight and remove taillight by gently pulling
rearward. Disconnect the wiring and set taillight aside. Remove (2) additional screws just below the taillight using the same socket size. Repeat for opposite side.
2. Remove fascia/splash guard- a.) Using a flat head screwdriver, remove (4) plastic push-pin rivets from along bottom of fascia.
©2022 Horizon Global Americas Inc. - Printed in Mexico Sheet 6 of 30 76928NP 8/15/22 Rev. A