Assembly - Red Sea Reefer Skimmer Mode D'emploi

RED SEA REEFER™ Skimmer

Assembly

Remove the components from the protective packaging and familiarize
yourself with them.
Note: The skimmer body has been assembled in a unique position for
transportation purposes only.
Placement & Orientation:
The REEFER Skimmers are designed to allow 3 distinct orientations of
™
the venturi pump inlet relative to the Skim regulator (left/center/right)
enabling the skimmer to be customized for the specific layout of your
sump. There must be at least 2.5cm (1") of unobstructed water column in
front of the venturi inlet. There must be at least 2.5cm (1") of free space
above the collection cup to allow it to be removed for cleaning.
10
The collection cup can be freely rotated so that the FoamView
can be set to whatever angle is best for you when regulating the skimmer.
Unscrew the skimmer body from the base and if necessary reposition the
pump holder to suit the desired orientation of the pump inlet. Turn the
skimmer base upside-down and push the rubber feet firmly into position.
window
™
.