Assembly - Red Sea REEFER Serie Mode D'emploi

Red Sea REEFER ™ Series

3 Assembly

The following information complements the graphic manuals.
WARNING: If you are not experienced in the construction of self-
assembly furniture or the installation of aquarium systems,
seek suitably qualified assistance.
ATTENTION: The top board of the cabinet (Part C) and some other parts
of the cabinet (in certain models) are packed under the
aquarium. In order to retrieve these parts, remove the
aquarium from its packaging. Make sure to avoid contact
between the Bulkheads on the bottom of the tank and the
floor, by placing the glass aquarium on Styrofoam parts
that are used in the package.
™
The REEFER includes the following main components:
• Glass aquarium
• Cabinet (self-assembly)
• Glass Sump including Bubble trap sponge, 225 micron filter bags and
Float valve for automatic top-up
• Internal Piping kit with outlet nozzle
• Top-up reservoir
Detailed instructions for the complete assembly of the REEFER
found in the accompanying graphic manuals.
Complete the assembly of the cabinet including the doors as shown in
the graphic assembly manual and place in the final operating position
(see location above).
NOTE: It is important to assemble the REEFER
WARNING: Read before lifting the glass aquarium onto the cabinet.
6
™ can be
™ in the order indicated.
The top of the cabinet is approximately 86cm/34" ( 100cm/40" for
Peninsula ) from the floor.
The table shows the approximate weights of the different models of the
™
REEFER aquarium glass.
Approximate weight of Aquarium Glass
Model
Nano 170 200
Weight 25kg/ 33kg/ 40kg/
55lb 72lb 88lb
Model XL 425 XL 525 XXL 625
Weight 90kg/ 120kg/ 155kg/
200lb 265lb 340lb
Ensure that you have the correct number of people to lift the aquarium
according to its weight and size.
Ensure that anyone lifting the aquarium is physically suitable for such an
operation and has been instructed in the correct methods of lifting heavy
objects.
Once the aquarium is correctly aligned with the cabinet, check that the
cabinet has not moved. If necessary readjust the position of the cabinet.
For units with adjustable legs: Using a spirit level on the top surface of
the glass tank, adjust the height of the legs to level the aquarium. Make
sure that all legs are touching the floor.
NOTE: The REEFER ™ aquarium system should not be moved when full
of water.
250 300 350 450
52kg/ 58kg/ 64kg/ 100kg/
115lb 128lb 140lb 220lb
XXL 750 3XL 900 P 500 P 650
195kg/ 225kg/ 105kg/ 170kg/
430lb 500lb 230lb 375lb