Assembly - Red Sea REEFER Serie Mode D'emploi

Red Sea REEFER ™ Series

3 Assembly

The following information complements the graphic manuals.
WARNING: If you are not experienced in the construction of self-
assembly furniture or the installation of aquarium systems,
seek suitably qualified assistance.
™
The REEFER includes the following main components:
• Glass aquarium
• Cabinet (self-assembly)
• Glass Sump including Bubble trap sponge, 400 micron filter bags and
Float valve for automatic top-up
• Internal Piping kit with outlet nozzle
• Top-up reservoir
Detailed instructions for the complete assembly of the REEFER
found in the accompanying graphic manuals.
Complete the assembly of the cabinet including the doors as shown in
the graphic assembly manual and place in the final operating position
(see location above).
NOTE: It is important to assemble the REEFER
6
™ can be
™ in the order indicated.
WARNING: Read before lifting the glass aquarium onto the cabinet.
The top of the cabinet is approximately 86cm/34" from the floor.
The table shows the approximate weights of the different models of the
REEFER ™ aquarium glass.
Approximate total weight of system including water
Model Nano 170
Weight 25kg / 33kg /
55lb 72lb
Ensure that you have the correct number of people to lift the aquarium
according to its weight and size.
Ensure that anyone lifting the aquarium is physically suitable for such an
operation and has been instructed in the correct methods of lifting heavy
objects.
Once the aquarium is correctly aligned with the cabinet, check that the
cabinet has not moved. If necessary readjust the position of the cabinet.
NOTE: The REEFER ™ aquarium system should not be moved when full
of water.
Before placing the glass sump in the cabinet make sure that the cabinet
doors are correctly aligned (see instructions in the cabinet assembly
manual). Once the sump is in position it will not be possible to make
adjustments to the lower hinge without moving the sump.
With the doors properly aligned, rotate the front section of the push
opener to the correct extension so that the doors will pop open when
pushed.
250 350 450
52kg / 64kg / 100kg /
115lb 140lb 220lb