Button Description - Grohe Veris F-digital 36 277 Mode D'emploi

Digital controller selection menu, see fold-out page II, Fig. [6].
Button Description
Start the selection menu (only if there is no water flowing)
Select by pressing and holding the
• F1 - Automatic filling/safety shut-off
Select other menu items by turning the ring:
• F2 - Calibration
• F3 - Register/de-register additional digital controller
The selection menu is exited by pressing and holding the
button or automatically after 3 minutes has elapsed.
F1 - Automatic filling/safety shut-off
- Confirm selection by pressing the
- Stop the water flow/timer by turning the ring anti-clockwise.
- Start the water flow/timer by turning the ring clockwise.
- Pressing the
exits the menu.
Abort the menu by pressing and holding the
F2 - Calibration, see Fig. [6]
- Confirm selection by pressing the
- Turn ring anti-clockwise and set minimum flow rate.
=>
Confirm flow rate by pressing the
- Turn ring clockwise and set maximum flow rate.
=>
Confirm flow rate by pressing the
,
- Turn ring
=>
Confirm 23 °C by simultaneously pressing the
,
- Turn ring
=>
Confirm 42 °C by simultaneously pressing the
Settings are saved and the menu exited.
Abort the menu by pressing and holding the
F3 - Register additional digital controller
- Confirm selection by pressing the
digital controller simultaneously.
- Press the buttons of the additional digital controller simultaneously
in order to register it.
- Pressing the
simultaneously saves the selection and exits the menu.
F3 - De-register additional digital controller
- Confirm selection by pressing the
digital controller simultaneously.
- Pressing the
simultaneously saves the selection and exits the menu.
Abort the menu by pressing and holding the
7
- / +
- / +
- / +
buttons simultaneously saves the quantity and
- / +
measure water temperature and set to 23 °C.
measure water temperature and set to 42 °C.
- / +
- / +
buttons on the existing digital controller
- / +
- / +
buttons on the existing digital controller
buttons simultaneously:
Start/Stop
buttons simultaneously.
Start/Stop
button.
buttons simultaneously.
- / +
buttons simultaneously.
- / +
buttons simultaneously.
- / +
buttons.
- / +
buttons.
Start/Stop
button.
buttons on the existing
buttons on the existing
Start/Stop
button.
Visualisation
Illuminated ring flashes red 1x
Illuminated ring flashes red 2x
Illuminated ring flashes red 3x
Illuminated ring flashes violet 1x
Illuminated ring flashes green 1x and water
flow is started
Water flow stops
Water flow starts
Illuminated ring flashes green 3x
Illuminated ring flashes violet 1x
Illuminated ring flashes green 1x and water
flow is started
Illuminated ring flashes green 1x
Illuminated ring flashes green 1x
Illuminated ring flashes green 1x
Illuminated ring flashes green 3x
Illuminated ring flashes violet 1x
Illuminated ring flashes green 1x
Illuminated ring flashes green 1x
Illuminated ring flashes green 3x
Illuminated ring flashes green 1x
Illuminated ring flashes green 3x
Illuminated ring flashes violet 1x