Publicité
Step 4
Insert the dowel end of four TWIST-LOCK® FASTENERS (7F) into the 419587
å
Left End and 419600 Right End as shown in the enlarged diagram.
NOTE: If you already pushed TWIST-LOCK® FASTENERS into the holes in the
å
ENDS (A and B), pull the FASTENERS back out of the holes. Pull at the front
and back edges, slowly working the FASTENERS out of the holes.
Push the ENDS (A and B) onto the TWIST-LOCK® FASTENERS in the 419600
å
Right End and 419587 Left End. Now, tighten eight TWIST-LOCK® FASTENERS.
419600
Credenza Top
419600
Right End
Page 8
U-Shape Assembly
A
B
Finished edge
419594
419587 Desk Top
419587
Left End
How to use the SAUDER TWIST-LOCK
1. Insert the dowel end of the FASTENER into the hole of the
adjoining part.
NOTE: The dowel end of the FASTENER must remain fully
inserted in the hole of the adjoining part while locking
the FASTENER.
2. Tighten the FASTENER with a Phillips screwdriver as tight
as possible.
Dowel end
®
FASTENER
www.sauder.com/services
Publicité
