Publicité
Step 16
Push three LEVELER BRACKETS (32G) over the holes in the bottom edges
å
of the ENDS (A and C).
Use a hammer to drive a PROPEL NUT (14M) into the holes in the LEVELER
å
BRACKETS (32G) and ENDS (A and C). Now, turn a LEVELER (16E) into
each PROPEL NUT.
NOTE: To raise a corner of the unit, turn the LEVELER counter-clockwise. To
å
lower a corner, turn the LEVELER clockwise.
Page 20
L-Shape Assembly
C
419594
A
32G
14M
16E
www.sauder.com/services
Publicité
