Publicité
Step 3
Push two LEVELER BRACKETS (32G) over the holes in the bottom edges
å
of the ENDS (A and B).
Use a hammer to drive a PROPEL NUT (14M) into the holes in the LEVELER
å
BRACKETS (32G) and ENDS (A and B). Now, turn a LEVELER (16E) into
each PROPEL NUT.
NOTE: To raise a corner of the unit, turn the LEVELER counter-clockwise.
å
To lower a corner, turn the LEVELER clockwise.
www.sauder.com/services
U-Shape Assembly
A
B
419594
32G
14M
16E
Page 7
Publicité
