Publicité
Step 9
NOTE: Before beginning this step, separate the BLACK 7/8"
å
LARGE HEAD SCREWS (17S) and BLACK 9/16" LARGE
HEAD SCREWS (1S). Do not confuse these SCREWS.
Fasten the LARGE END (C) to the BACK (E). Tighten four
å
TWIST-LOCK® FASTENERS.
Fasten two CORD MANAGERS (65P) to the BACK (E). Use
å
two BLACK 9/16" LARGE HEAD SCREWS (1S).
Dowel end
How to use the SAUDER TWIST-LOCK
1. Insert the dowel end of the FASTENER into the hole of the
adjoining part.
NOTE: The dowel end of the FASTENER must remain fully
inserted in the hole of the adjoining part while locking
the FASTENER.
2. Tighten the FASTENER with a Phillips screwdriver as tight
as possible.
www.sauder.com/services
L-Shape Assembly
i t h
e w
®
f a c
C K
S u r
- L O
I S T
E R S
T W
T E N
F A S
C
®
FASTENER
BLACK 9/16" LARGE HEAD SCREW
(2 used for the CORD MANAGERS)
Notch
65P
E
419594
1S
Edge with
TWIST-LOCK®
FASTENERS
Page 13
Publicité
