Final Gear Oil - Suzuki LT-F400K3 Manuel D'assemblage

FRONT/AVANT
REAR/ARRIERE
Reinstall the seat. Insert the seat hook into the seat
hook retainer and push the seat down firmly.
A: Seat assembly
B: Seat hook
C: Seat hook retainer
FRONT DIFFERENTIAL GEAR OIL (FOR LT-F400F)
Place the vehicle on a level ground.
Check the front differential gear oil levels as follows.
Remove the oil filler plug. If the oil level is below the
filler hole, add the gear oil through the filler hole
(Hypoid gear oil SAE 90 API grade GL-5) until the oil
level reaches the bottom of the filler hole.
(Use hypoid gear oil SAE 80, API grade GL-5, if the
vehicle is ridden where the ambient temperature is
below 0°C or 32°F.)
Replace the oil filler plug and tighten it securely.
A: Oil filler plug

FINAL GEAR OIL

Place the vehicle on a level ground.
Check the final gear oil levels as follows. Remove the
oil level bolt. If the oil level is below the level hole, add
the gear oil through the filler hole (Hypoid gear oil
SAE 90 API grade GL-5) until the oil flows out from
the level hole.
(Use hypoid gear oil SAE 80, API grade GL-5, if the
vehicle is ridden where the ambient temperature is
below 0°C or 32°F.)
Replace the oil level bolt and the oil filler plug tighten
them securely.
B: Oil filler plug
C: Oil level bolt
17