Conditions Of Warranty - Focal SOLO6 BE Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

SOLO6 BE - TWIN6 BE - SUB6
U s e r m a n u a l
Please validate your Focal-JMlab warranty,
it is now possible to register your product online: www.focal.com/warranty
Thank you for purchasing a Focal product. Welcome to our High-Fidelity world. Innovation, tradition, excellence
and pleasure are our values; our one and only aim is to bring you a sound that is rich, pure and true. To get the
most out of your product, we recommend that you read the instructions in this booklet, then store it in a safe
place to refer to in the future.
Unpacking
In addition to one loudspeaker and a user manual (such as this one), each Solo6 Be or Twin6 Be carton should
contain:
• A power cord.
• A guarantee card.
• A plastic bag containing an information note "Beryllium inverted dome tweeter", and some adhesive tape to
affix on the tweeter in the unlikely event of the dome being damaged.
In addition to one subwoofer and a user manual each Sub6 Be carton include:
• A power cord.
• A guarantee card.
• A grille protecting the drive unit (which it is advisable to remove whenever possible).
Please check that none of these items are missing, and remove all accessories from the carton.
To remove the loudspeaker from its carton without damage, open the end flaps fully and bend them right
back. Then remove the upper cushion and lift the loudspeaker out gently. Inspect the speaker for signs of any
possible damage.In the unlikely event of this having occurred please inform the carrier and supplier. It is a good
practice to keep the packaging in case of future transportation.
Beryllium
Solo6 Be and Twin6 Be use a tweeter with an inverted dome made from pure beryllium, with the capacity to
augment the bandwidth to 40 kHz. In its solid form, beryllium is harmless. However, given its nature, certain
precautions should be taken to avoid exposure to unnecessary risks:
• The beryllium dome must never come into contact with abrasive materials.
• If the beryllium dome is damaged in any way, you should cover up the entire surface area of the dome using
the protective adhesive strip supplied, as soon as possible. You will find the adhesive strip in the plastic packet
containing the leaflet for the tweeter with an inverted dome made from pure beryllium. Contact the retailer to
have the tweeter dismantled and replaced by trained personnel at the distributor.
• If the dome is broken, any beryllium particles should be carefully collected using sticky tape and then placed
in a hermetically sealed plastic bag and sent back to the retailer along with the loudspeaker.
For more information, please refer to the safe use manual in the box.
You can also address your questions directly to:
beryllium@focal.com

Conditions of warranty

All Focal loudspeakers are covered by warranty drawn up by the official Focal distributor in your country. Your
distributor can provide all details concerning the conditions of warranty. Warranty cover extends at least to
that granted by the legal warranty in force in the country where the original purchase invoice was issued.
7

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Twin6 beSub6

Table des Matières