Paper (Label/Tag) Specifications; Ribbon Specifications - Toshiba TEC B-450-QP Série Mode D'emploi

2. SPECIFICATIONS

2.3 PAPER (LABEL/TAG) SPECIFICATIONS

Item
Span of one label/tag
Label length
Width including backing paper
Label width
Gap length
Black mark length (Tag paper)
Effective print width
Effective print length
Print speed up/slow down area
Black mark length (Label)
Outer roll diameter
Thickness
2.4 RIBBON SPECIFICATINS
Type
Width
Length
Outer diameter
NOTES: 1. To ensure good print quality and maximum print head life use only TOSHIBA TEC specified paper and
ribbons.
2. For further information about paper and ribbon, refer to Section 10. CARE/HANDLING OF THE PAPER
AND RIBBON.
2.5 OPTION
Option Name
Cutter module
Strip module
Keyboard module
Expansion I/O inter-
face board
LAN interface board
NOTE: To purchase the OPTIONAL KIT, please contact your authorized TOSHIBA TEC repre-
sentative or TOSHIBA TEC Head Quarter.
Label dispensing mode
Label
Tag
Spool type
60 mm ~ 110 mm
(300 m)
Ø65 mm (max.)
Type
B-7204-QM
B-7904-H-QM
KB-80-QM
B-7704-IO-QM
B-7704-LAN-
QM
Batch mode
15.0 ~ 999.0
25.4 ~ 999.0
13.0 ~ 997.0 23.4 ~ 997.0
25.4 ~ 114.0
22.4 ~ 111.0
2.0 ~ 20.0
10.0 ~ 105.7
15.0 ~ 500.0
15.0 ~ 500.0
MAX. ø152.4 (Paper Core ø38, 40, 42 or 76.2)
0.1 ~ 0.17
A stop-and-cut rotary cutter
This module strips the label from the backing paper with the
take-up block and strip block.
This module is an external intelligent keyboard unit.
Installing this board in the printer allows a connection with
an external device with the exclusive interface, such as the
keyboard module.
This board enables the printer to be used in a LAN network
by using the command language.
E2-2
ENGLISH VERSION EO1-33005
2.3 PAPER (LABEL/TAG) SPECIFICATIONS
Strip mode Cut mode
Label: 37.0 ~ 999.0
Tag: 25.4 ~999.0
31.0 ~ 993.0
6.0 ~ 20.0
2.0 ~ 20.0
2.0 ~ 20.0
1.0
MIN. 2.0
0.13 ~ 0.17
0.1 ~ 0.17
Description
[Unit: mm]