Safety Warning - NewAge Products VERSARAC PRO Guide D'installation

Safety Warning

PLEASE READ THIS FIRST
1. All VersaRac Pro units have a rated load capacity of 800 pounds, evenly distributed, using
3" lag bolt anchored into solid wood studs or supports capable of supporting such a load.
2. If accessory hooks are purchased, weight capacities of the hooks must be included in the
maximum load of 800 lbs per single VersaRac Pro Unit.
3. Do not load more than 800lbs on to a VersaRac Pro. Live loads (people, pets, etc) may
weigh less than the rated weight capacity, however will exert force on the rack beyond its
rated capacity. As such, do not stand, jump or hang from your VersaRac Pro.
4. VersaRac Pro units must be installed into structurally sound overhead studs or supports.
NewAge Products Inc. makes no claim to the capacity or strength of the structure to which
the units are mounted.
5. NewAge Products Inc. can not be held liable for structure failure, or damage or injury
resulting from structure failure.
6. Always inspect the structure of the ceiling to ensure there is suitable supports. Ensure
overhead supports are structurally strong enough to hold one or more VersaRac Pro's.
7. VersaRac Pro is designed for installation into wooden ceiling studs. Do not attempt
mounting to steel beams.
8. Ensure all weight is distributed evenly on the rack. Place heavier objects near the vertical
angle posts, and lighter objects in the center.
9. Do not jump or climb on your VersaRac Pro.
10. Routinely inspect your system to ensure all components are fastened securely.
5