Installation Tips - NewAge Products VERSARAC PRO Guide D'installation

Installation Tips

Installing a Stud Hanger
If the spacing of your ceiling studs do not match the desired size and direction of your VersaRac
installation you will need to install a stud in the correct position. Please consult your local
professional contractor for assistance installing a stud hanger.
Using suitable stud hangers, install two additional wooden ceiling studs in the desired location.
(ceiling stud, stud hanger and hardware not included)
Fastening to Engineered ceiling Studs
If the construction of your ceiling is using engineered ceiling studs you must install an additional
ceiling stud (minimum 2" x 8") perpendicular between two of the engineered ceiling studs.
Install four additional wooden ceiling studs in the required locations for your ceiling brackets
depending on the VersaRac Pro size and orientation as determined on page 6 (ceiling stud and
hardware not included)
Warning:
Engineered ceiling studs are not suitable for directly fastening the ceiling brackets.
22
wooden ceiling stud