Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Installing Ceiling Brackets & Vertical Posts (Contd.)
3
Determine the height of the VersaRac Pro from ceiling to bottom of the overhead rack.
If desired height is greater than 18", bolt an 18" vertical post to a 27" vertical post using two
4
hex bolts, two lock nuts and four flat washers. Use one hex bolt on each side of the vertical
post with keyholes in the same direction.
27in
Vertical
Post
18in
Vertical
Post
Tighten the vertical posts using one hex
5
bolt, two flat washers and one lock nut to
the top ceiling brackets.
14
Install the sway bracket diagonally on to
the ceiling bracket and top vertical post
6
using two hex bolts, two flat washers and
two lock nuts.
18" or
27-42"
Minimum
3inch
Overlap
Publicité
Table des Matières
