Installing Perimeter Beams - NewAge Products VERSARAC PRO Guide D'installation

Installing Perimeter Beams

NOTE: If installing two VersaRac Pro's vertically, please refer to page 20.
Insert the side beam by guiding the shoulder rivets on the side beam into the keyhole slots
9
found in the vertical posts.
Similarly, follow step 9 on the opposite
10
side.
Bolt together the two front perimeter beams and front L Joining bracket with 8 carriage bolts
11
and lock nuts.
16
NOTE: Ensure beams
are installed at the
same height on all
the corners.