BBG M3 Manuel De Service Et De Maintenance page 16

Before connecting to the machine blow out the air hose to remove dirt and water.
Before blowing out the hose grasp the end of it with both hands and place feet firmly on ground.
-
Do not open the air cock abruptly.
-
Wear eye protection.
-
Do not point hose at other people.
-
If the compressed air is dirty or contains too much moisture fit a filter or water separator in the air
-
line.
During operation make sure that all parts of the machine are tightly assembled and when using
shank ends A15, C15, K13, that the steel is secured by the retainer spring or cap retainer.
To ensure operating safety and maximum performance use only steels of the right size and suitable
for the job in hand.
- 14 -
OPERATION
ATTENTION
ATTENTION