Care & Maintenance - Powerfist GAS WATER PUMP Mode D'emploi

V1.0
Should the spark knock or pinging continue to occur, when the engine speed is
steady under a normal load, consider replacing the fuel. If the sounds continue
after changing the fuel, contact Princess Auto Ltd. for a solution or see a
qualified technician.
NOTICE! Running the engine with persistent spark knock or pinging can cause
engine damage.
STOPPING THE WATER PUMP
NOTICE! Do not stop the engine by using the CHOKE lever. This may cause an
engine backfire that could damage the engine.
1. Move throttle lever (G) to the SLOW position.
2. Push ON/OFF switch (H) to the OFF position.
3. Turn the fuel valve (N) to the OFF position.
LOW ENGINE OIL SHUTDOWN
The oil alert will stall the engine when the oil level in the crankcase is low. This
will prevent engine damage. Check the oil level if the engine stalls and you are
unable to restart the engine.
CARE & MAINTENANCE
1. Maintain the tool with care. A tool in good condition is efficient, easier to
control and will have fewer problems.
2. Inspect the tool components periodically. Repair or replace damaged or
worn components. Only use identical replacement parts when servicing.
3. Check fuel system for leaks or signs of deterioration, such as chafed or
spongy hose, loose or missing clamps, or damaged tank or cap.
4. Disconnect the spark plug lead from the spark plug and place the wire
where it cannot contact spark plug when adjusting or making repairs to
your pump.
5. Follow instructions for lubricating and changing accessories.
6. Only use accessories intended for use with this tool.
7. Maintain the tool's labels and name plates. These carry important information.
If unreadable or missing, contact Princess Auto Ltd. for replacements.
WARNING! Only qualified service personnel should repair the tool. An
improperly repaired tool may present a hazard to the user and/or others.
Visit www.princessauto.com for more information
2 in. Gas Water Pump 8887200
13