Switching On And Off; Preparation - Beko BKS 1410 Manuel D'utilisation

4 Preparation and usage
Make sure that the supply voltage indicated on
the rating plate (under the appliance) conforms to
the local supply voltage.

4.1 Preparation

Your appliance is supplied with a dust bag already
fitted. Once you have assembled the individual
parts the appliance is ready to use.
1. Push the plug-in contact of the elastic hose (6)
in the socket (8) provided on the dust container
until it latches into place.
WARNING: To remove the elastic
A
hose (6) press the side release
buttons on the plug-in contact and
then pull out the hose.
2. Attach the other end of the flexible hose onto
the metal telescopic pipe (3).
3. Attach the required brush or accessories to the
lower end of the metal telescopic pipe (3).
WARNING: Fit together all the
A
plug-in connections with a push and
turn movement and undo them with
a pull and turn movement.
8 / EN

4.2 Switching on and off

1. Pull out the required length of power cord.
WARNING: The maximum cable
A
length is indicated by a red mark.
Never try to pull out the power cord
beyond the red mark.
2. Plug the power cord plug into the wall socket.
3. Switch on the appliance by pressing pushbutton
(14).
4. Set the required suction power with control
switch (15).
5. After use, press (14) button to switch off the
appliance and remove the power cord plug from
the socket.
A
WARNING: If the appliance is not
being used, always disconnect the
mains plug at the wall socket.
Vacuum cleaner / User manual