Table des Matières
Publicité
10. If you wish to serve a cup of coffee before brew cycle is
complete, simply remove Carafe from Warming Plate. Dripping will
automatically cease. Return Carafe to position on Warming Plate
within 30 seconds; dripping will resume. If the Carafe is not returned
to the Warming Plate, the coffee may overflow from the Filter Holder.
11. When brewing is completed, the Coffee Maker switches to a Keep
Warm mode which will hold coffee at the proper serving tempera-
ture. To keep the coffee hot, place the Carafe back on the Warming
Plate when not serving.
12. Press the AUTO ON/OFF Button again to turn the unit OFF when
not in use. When the brewing cycle is over, the Coffee Maker will
automatically shut off after two hours. The Indicator Light will turn off.
13. Allow the unit to cool for 10 minutes between cycles.
WARNING: Warming Plate is hot! Do not touch bottom of Carafe or
Warming Plate during or after brewing.
NOTE: The amount of coffee in the Carafe may be slightly less than the
amount of water placed in the Water Chamber, since some of the water is
absorbed by the coffee grounds.
8
Publicité
Table des Matières
