Table des Matières
Publicité
7. To remove the Tea Infusion Basket, prop the
Carafe Lid open with one hand and with the
other hold the rim of the Tea Infusion Basket.
The tab on the outer rim of the Tea Infusion
Basket will be aligned with the
located on the bottom side of the Carafe Lid.
Turn the Tea Infusion Basket counter-clock-
wise until the tab aligns with the
tion located on the bottom of the Carafe Lid.
Remove the Tea Infusion Basket and close
the Carafe Lid.
8. Place tea bags or loose leaf tea into the Tea
Infusion Basket. Be sure that no bags are outside of the basket
opening and if using tea bags, all strings have been removed.
9. Assembly of the Tea Infusion Basket to the Carafe is basically the
reverse of Step 7. Place the Tea Infusion Basket on the bottom side
of the Carafe Lid aligning the tab on the outer rim of the Basket with
the
position, located on the bottom of the Carafe Lid. Hold the
Tea Infusion Basket and turn clockwise until the tab aligns with
the
position and locks into place. Close the Carafe Lid.
10. Place the Carafe onto the Warming Plate. Make sure the Carafe is
positioned correctly on the Warming Plate under the Auto Pause and
Pour Assembly.
11. Press the AUTO ON/OFF Button once. The Indicator Light will turn
on and the brew cycle will begin.
12. If you wish to serve a cup of tea before the brew cycle is
complete, simply remove Carafe from Warming Plate. Dripping will
automatically cease. Return Carafe to position on Warming Plate
within 30 seconds; dripping will resume. If the Carafe is not returned
to the Warming Plate, the hot water may overflow from the Filter
Holder.
13. When brewing is completed, the appliance switches to a Keep Warm
mode which will hold tea at the proper serving temperature. To keep
the tea hot, place the Carafe back on the Warming Plate when not
serving.
NOTE: Depending on individual taste preferences and the type of
tea being brewed, you may prefer to let the tea steep longer before
removing the Tea Infusion Basket.
CAUTION: Carafe, Lid, and Tea Infusion Basket are hot after
brewing! Use extreme care when handling these parts.
position
posi-
11
FIGURE 2:
Tea Infusion Basket Assembly
Publicité
Table des Matières
