Melita Fast Brew MEFB6B Mode D'emploi page 11

Table des Matières

Publicité

NOTE: The amount of coffee in the Carafe may be slightly less than the
amount of water placed in the Water Chamber, since some of the water is
absorbed by the coffee grounds.
NOTE: The programmable function must be reset after each programmed
use.
Brewing Tea - Immediate Start
1. Plug the appliance into a standard 120V AC electrical outlet.
2. Fill the Carafe with cold tap water to the 11 cup marking. Close the
Lid back into position.
NOTE: 11 cups is the maximum for brewing tea otherwise the
Carafe will overflow.
NOTE: We do not recommend brewing less than 11 cups of tea.
3. Lift up the hinged lid on the top of the unit and slowly pour water into
the Water Chamber.
4. Make sure there is no paper coffee filter inside the Removable Filter
Holder. This is not needed for the tea cycle, but the Filter Holder
must be in its proper place. When properly seated, the tab on the
Filter Holder will be positioned on the front of the Holder Cavity.
Close the lid back into position.
5. Set the Brew Strength Control to the desired strength.
6. With the Tea Infusion Basket you have the choice to use either
Loose Leaf Tea or Tea Bags.
We recommend using the following quantities, based on brewing 11
cups:
Loose Leaf Tea
Tea Bags
NOTE: Chart may be altered depending on individual taste prefer-
ences and the type of tea being brewed.
NOTE: If using tea bags, it is necessary to remove any strings
attached.
8 teaspoons
8 bags
10

Publicité

Table des Matières
loading

Produits Connexes pour Melita Fast Brew MEFB6B

Ce manuel est également adapté pour:

Fast brew mefb6wFast brew mefb6bcanFast brew mefb6wcan

Table des Matières