Melita Fast Brew MEFB6B Mode D'emploi page 8

OPERATING INSTRUCTIONS
Brewing Coffee - Immediate Start
NOTE: When brewing coffee, the Tea Infusion Basket is not need-
ed. To remove the Tea Infusion Basket, prop the Carafe Lid open
with one hand and with the other hold the rim of the Tea Infusion
Basket. The tab on the outer rim of the Tea Infusion Basket will be
aligned with the
Carafe Lid. Turn the Tea Infusion Basket counter-clockwise until the
tab aligns with the
Carafe Lid. Remove the Tea Infusion Basket and close the Carafe
Lid.
1. Plug the appliance into a standard 120V AC electrical outlet.
2. Markings on the Carafe indicate the level of water required to brew
the desired number of cups. Fill the Carafe with cold tap water.
Close the Lid back into position.
NOTE: Brewing less than 4 cups is not recommended.
3. Lift up the hinged lid on the top of the unit and slowly pour water into
the Water Chamber.
4. Grasp the Removable Filter Holder and lift straight up and out of the
Filter Cavity. Insert a #4 paper coffee filter inside the Removable
Filter Holder.
We recommend using Melitta #4 cone-shaped filters.
5. Place coffee grounds in the filter, using one level tablespoon of drip
grind coffee for each cup of brewed coffee.
6. Replace the Removable Filter Holder by pushing it down into the
Filter Holder Cavity. When properly seated, the tab on the Filter
Holder will be positioned on the front of the Holder Cavity.
7. Set the Brew Strength Control to the desired strength.
8. Place the Carafe onto the Warming Plate. Make sure the Carafe is
positioned correctly on the Warming Plate under the Auto Pause and
Pour Assembly.
9. Press the AUTO ON/OFF Button once. The Indicator Light will turn
on and the brew cycle will begin.
position located on the bottom side of the
position located on the bottom of the
7