Technical Specification - MPM MKW-06M Notice D'utilisation

TROUBLESHOOTING
PROBLEM
Water leaks from underneath the
espresso machine
Espresso machine fails to work
Steam does not froth milk
The coffee tastes sour

TECHNICAL SPECIFICATION

See the product's nameplate for technical specifications.
Length of the power cord: 1.0 m
NOTE! MPM agd S.A. reserves its right to modify the technical data!
PROPER DISPOSAL OF THE PRODUCT
Poland Marking on the product indicates that after the service-life of the product expires, it should not be disposed
with other type of municipal waste. Used equipment may have a negative impact on the environment
and health of people due to potentially containing hazardous substances, mixtures and components. Mixing
electric waste with other types of waste or disassembling those in an unprofessional manner may cause
a release of substances that are hazardous to the environment and health. Used equipment should be hand-
ed-over to a point for collection of electric waste. In order to obtain detailed information regarding the electric waste col-
lection points, the user should contact the municipal point of electric waste collection or used equipment processing de-
partment.
CAUSE
Drip tray overflow
Espresso machine does not
work properly
No power
Steam temperature too low
The milk container is too big
Skimmed and warm milk
is used
The espresso machine was not
rinsed of all citric acid
The coffee was poorly kept
(waste electrical and electronic equipment)
SOLUTION
Empty the drip tray
Contact an authorised service centre
Turn on the espresso machine, check the connection to
the mains, and contact an authorised service centre, if
necessary
Wait until the espresso machine is ready to vent hot steam
Use a tall mug with a narrow mouth
Use fat or semi-skimmed cold milk
Pass hot water several times through an empty filter
attached to the receptacle
Use fresh ground coffee Keep coffee in an air-tight
container
19