Effects; Programming A Playlist - Renkforce 1192999 Notice D'emploi

i) Effects
The device features a reverse, brake and scratch effect.
Reverse effect
• Push the REVERSE button (7) to reverse playback. The track is now played back backwards.
• Push the REVERSE button (7) again to return to the original playback direction.
Brake effect
• Push the BRAKE button (5) to turn on the effect.
• Playback starts with a delay instead of abruptly.
• This effect resembles the effect produced when starting/stopping a turntable.
Scratch effect
• Push the SCRATCH button (4) to turn on the effect.
• Turn the JOG WHEEL to scratch similar to a turntable.
• Push the SCRATCH button (4) again to turn off the effect.
j) Programming a playlist
• Stop playback.
• Push the PROG button (19).
• Use the TRACK dial (16) to select the first track of the playlist.
• Push the PROG button (19) again and use the TRACK dial (16) to select the next track.
• Follow the steps above to finish programming your playlist with the desired tracks.
• Push the PLAY/PAUSE 6/3 button (2) to start playback of the playlist.
• To delete the playlist, push and hold the PROG button (19) for approx. 3 seconds until the display no longer
shows PROGRAM.
38