Renkforce 1192999 Notice D'emploi page 30

(12) IN button
The device allows you to save a seamless playback loop (LOOP). To use this function, the device features
the buttons IN (12), OUT (11) and RELOOP (10).
Use the IN button to program the starting point for the playback loop.
You can find a detailed description of the LOOP function under „LOOP function (playback loop)"
in the following chapter of this user manual.
(13) TIME button
Use this button to toggle between the display's various play time display options:
Elapsed track time (ELAPSED) > Remaining track time (REMAIN)
(14) TAP TEMPO button
Tap this button to the beat of the music.
On the right, the display shows the BPM (beats per minute) value.
(15) FOLDER button
Push this button to use the TRACK dial (16) to select folders.
Turn the TRACK dial (16) to select files on your USB storage device.
The file names are shown in the lower line on the display.
Push the TRACK dial (16) to select the displayed folder.
(16) TRACK dial
Turn the dial to select tracks on your USB storage device.
The tracks are shown on the display.
Push the TRACK dial (16) to select the displayed track.
(17) SEARCH buttons
Use these buttons to fast forward/fast reverse.
Playback is muted while one of the two buttons is pushed and held. View the play time display for
orientation while using the fast forward/fast reverse function.
(18) PLAY MODE button
Use this button to toggle the player between single title playback (SINGLE), continuous title playback
(CONT) and repeated playback (REPEAT):
SINGLE: The device switches to PAUSE mode after each track
CONT: The device plays back all tracks and then repeats
REPEAT: The device repeats the current track
3 LEDs above the PLAY MODE button display the play mode setting.
30