Troubleshooting - ecofort ecoQ DryAir 13L Energy Saver Manuel D'utilisation

TROUBLESHOOTING

The dehumidifier will not switch on
The humidity is not reducing
Unusual noises
Water in tank overflows
Error code
Make sure that the mains lead is properly plugged in and
-
that there is power in the wall socket.
The water tank is full or incorrectly fitted.
-
The set humidity level has been reached.
-
Power plug or cord damaged.
-
The dehumidifier has not been used long enough.
-
Make sure that the doors and windows are closed.
-
The ambient temperature is too low.
-
The surrounding humidity level is too low.
-
The air filter frame is dirty.
-
Exceed recommended room coverage area.
-
The ambient humidity level is lower than the desired
-
humidity level set.
The dehumidifier is tilted or standing on an uneven
-
surface.
Make sure that the air filter is clean
-
Loose or foreign particles inside the unit.
-
Sound of flowing refrigerant.
-
Water tank may be damaged.
-
Float for water auto-sensor is not in place.
-
Internal drainage passage is blocked or obstructed.
-
E1: Temperature sensor error. Contact customer care center.
E2: Humidity sensor error. Contact customer care center.
52