IFM VSE151 Notice D'utilisation page 22

VSE151 Electronique de diagnostic avec interface EtherNet/IP pour capteurs de vibrations
Attribut Nom
2 Max instance
3 Number of instances
Attributs de l'instance
Attribut Nom
1 Interface speed
2 Interface flags
3 Physical address
4 Interface counters
5 Media counters
6 Interface control
7 Interface Type
8 Interface State
22
Type de don-
Accès
nées
Get UINT
Get UINT
Type de don-
Accès
nées
Get UDINT
Get DWORD
Get ARRAY of 6
USINTs
Get Structure of 11
UINTs
Get Structure of 12
UINTs
Get, Set Structure of
WORD
Get USINT
Get USINT
Valeur
2
2
Valeur / description
Interface Speed currently in use. Speed in bps
(e.g. 10,100)
Bit 0 - Link Status
Bit 1 -
Half/Full Duplex Status
(0= Half Duplex, 1= Full Duplex)
Bit 2...4 -
Auto negotiation Status
(0=Auto negotiation in progress; 1=Auto nego-
tiation and Speed detection failed;
2=Auto negotiation failed but detected Speed;
3 = Successfully negotiated;
4 = Auto negotiation not attempted)
Bit 5 - Not supported
Bit 6 - Not supported
Bit 7...31 - Reserved
MAC layer address
Interface specific counters
Details are defined in
„THE CIP NETWORKS LIBRARY Volume 2
EtherNet/IP Adaptation of CIP"
Media specific counters.
„THE CIP NETWORKS LIBRARY Volume 2
EtherNet/IP Adaptation of CIP"
Interface Control Bits
Bit 0 - Auto negotiation
(0 = active; 1 = inactive)
Bit 1 - Half/Full Duplex
(0 = half duplex; 1 = full duplex)
Bit 2...15 - reserved
Data rate
(10 = 10Mbps; 100 = 100Mps)
Type of interface:
0 = Unknown interface type
1 = The interface is internal to the device
2 = Twisted pair
3 = Optical fiber
4..255 = Reserved
Current operational state of the interface:
0 = Unknown interface state
1 = The interface is enabled and is ready to
send and receive data
2 = The interface is disabled
3 = The interface is testing
4...255 = Reserved