Atlantic Muraux DOJO AS 007 DBB.UI Notice D'installation Et D'utilisation page 34

1. Active operation mode display
Operation mode
Remote controller
2. Signal sending display
3. Active swing mode display
4. Active fan speed display
5. Locking of the remote controller display
6. TIMER ON or TIMER OFF display
7. Set temperature display
8. Additional functions display
Function
Remote controller
9. QUIET button. See 4.2, page 35.
10. HEAT button (To activate/deactivate HEAT mode)
11. COOL button (To activate/deactivate A/C mode)
12. AUTO button (To activate/deactivate AUTO mode)
13. FAN button (To select a fan speed). The cycle sequence is as follows:
When Fan speed is set to AUTO, the unit automatically adjusts the fan speed according to room
temperature
14. TIMER button. See 4.3, page 36.
15. HEALTH button. Function not available.
16. LOCK button (To lock or unlock the remote controller)
17. LIGHT button (To control the light level and stand by mode of the display board of the unit)
18. ON/OFF button
19. DRY button (To activate/deactivate DRY mode)
20. TEMP +/- button (To adjust set temperature. With each press, temperature value increases or
decreases by 1°C. Press and hold the button to change the temperature value faster.)
21. SWING button. See 4.1, page 35.
22. Time setting buttons
23. EXTRA FUNCTION button (To activate/deactivate additional functions). The cycle sequence is as
follows : Sleep > Health Airflow upward > Health Airflow downward > initial airflow > Turbo > Fan
mode > A-B code > Left & right Airflow (function not available).
24. CANCEL/CONFIRM button (To cancel or validate a setting)
25. RESET button (When the remote controller does not operate normally, use a pointy instrument to
reset it).
34
Auto Cool
Quiet
Low Medium
Dry
Sleep
AUTO
High
Fan Heat
Turbo