Power Fist 8668147 Mode D'emploi page 6

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

8668147
4.
Ensure that all applicable pins, bolts and nuts are firmly tightened before
using.
5.
Use only with accessories rated to handle the forces exerted by the device
during operation. Other accessories may break and forcefully launch
pieces.
6.
Do not place your hands between moving components.
7.
Do not use a handle extension for the jack handle.
8.
Make sure the saddle is fully positioned under the load before operating.
9.
Make sure the load is stable, so it does not shift when lifting or lowering.
10. When using more than one bottle jack to lift a load, each bottle jack
should have the same lifting capacity of the entire load being lifted. The
lifting speed should be synchronized and the load on each jackbottle jack
should be balanced to prevent the load from tipping.
11.
Once the load is lifted to the desired height, support the load with jack
stands to prevent injury should the bottle jack fail. Do not work under a
load that is supported only by a jack.
12. Never allow load to tilt on the bottle jack as the bottle jack may kick out
causing injury to the operator and/or cause the load to fall.
13. Do not attempt to move the load while on the bottle jack. The jack must
only be used in a static position for lifting and lowering loads. Ensure that
the load remains stable at all times.
14. Do not push a load off the bottle jack; lower carefully.
15. Ensure that there are no obstructions under the load and that the area is
clear before lowering the device.
16. Lower the load in a slow and controlled manner to prevent shock loading.
Shock loading may cause the device to fail and lead to property damage
and/or severe personal injuries.
LIFTING AND LOWERING VEHICLES
1.
Secure the vehicle before lifting. Set it in parking gear, engage the parking
brake and chock the wheels.
2.
Support the vehicle on areas specified by the vehicle manufacturer only.
3.
Do not allow people to enter a vehicle that is being lifted or moved.
4.
When lifting a vehicle, apply the emergency brake and block all wheels.
5.
Immediately after lifting, support the load with jack stands of adequate
capacity. Do not work under a load that is supported only by a jack.
www.princessauto.com / 1-800-665-8685
PNEUMATIC/HYDRAULIC BOTTLE JACK
V1.0
Page 6

Publicité

Table des Matières
loading

Table des Matières