Basic Settings - Bosch NET5466SC Mode D'emploi

Basic Settings

The appliance has various basic settings. You can adjust
these settings to the way you usually cook.
Display Function
™‚ Automatic child lock
Off*
‹
On
‚
Sound signals
™ƒ
Confirmation beep and error signal off
‹
Only error signal on
‚
Only confirmation beep on
ƒ
All signals on*
„
™† Automatic timer
‹ Off*
- Automatic shut-off time
‚ ŠŠ
Duration of timer end signal
™‡
10 seconds*
‚
30 seconds
ƒ
1 minute
„
™Š Selection time for heating element
Unlimited*: You can adjust the settings of the last heating element used at any time without having to
‹
select it again.
Restricted: You can adjust the settings for the last heating element used within 10 seconds after
‚
selecting it. After that you will have to reselect the heating element before setting it.
™‹ Reset to basic settings
Off*
‹
‚ Reset the appliance to basic settings
*factory settings
Changing the basic settings
The cooktop must be turned off.
Turn on the cooktop.
1.
Within the next 10 seconds, touch the
2.
4 seconds.
and flash alternately in the left-hand display;
™ ‚
up in the right-hand display.
Touch the symbol repeatedly until the required
0
3.
indicator appears in the left-hand display.
14
Set the required value on the control panel.
4.
symbol for
0
Touch the
5.
The setting is activated.
Switching off
To exit the basic setting, turn off the cooktop with the
lights main switch and make new settings.
‹
symbol for 4 seconds.
0