MEDC PH1 Manuel Technique page 3

3.0 STANDARD WIRING OPTIONS
See below for the standard wiring options for the PH1. If a different wiring layout has been specified when
ordering the unit, please see the separate wiring diagram supplied with the unit.
Standard wiring – switch only
Single Switch Double Switch
Standard wiring – c/w EOL resistor
R1 – EOL resistor
Standard wiring – c/w series resistor or series & EOL resistors
R1 – Series resistor R2 – EOL resistor (if fitted)
© Cooper MEDC 2011 08/11