Problem & Solution - One for All URC-3740 Mode D'emploi

Problem:
Your brand is not listed in
the code section?
The ONE FOR ALL does not
operate your device(s)?
The ONE FOR ALL is not
performing commands
properly?
Problems changing
channels?
Video not recording?
The ONE FOR ALL does not
respond after pressing a
key?
The red LED does not blink
when you press
a key?
WWW ONEFORALL COM
Problem & Solution
Solution:
Try the search method on page 9.
A) Try all the codes listed for your
brand. B) Try the search method on
page 9.
You may be using the wrong code.
Try repeating the Direct Set-Up
using another code listed under
your brand or start the search
method over again to locate the
proper code.
Enter the programme number
exactly as you would on your
original remote.
As a safety feature on your ONE
FOR ALL, you must press the Record
key twice.
Make sure you are using new
batteries and are aiming the ONE
FOR ALL at your device.
Replace batteries with 4 fresh, new
"AAA" alkaline batteries.
19