Connection Positions; Wiring Diagram And Legend; Wiring Diagram; Legend - Iom CWAR 01-N-3ALL Manuel D'installation Et De Maintenance

10.3. CONNECTION POSITIONS

Factory-configured water connections are available in 4 different positions:
² right side
² left side
² rear panel
² underneath (option not available when the air filter is fitted underneath the appliance)

11. WIRING DIAGRAM AND LEGEND

11.1. WIRING DIAGRAM

11.2. LEGEND

SE 4273 models 07/09/012

11.2.1. POWER SUPPLY

All the electrical installations and wiring associated with this equipment must comply with local installations
regulations.
230 Single phase models:
Connection to the terminals N, L and
² - L : phase
²
- N : neutral
² - : P-E ground

11.2.2. WIRING DIAGRAM KEY DESCRIPTIONS

FFG : Fuse carrier
11.2.2.1. COOLING
M1 : Refrigeration compressor
F1 : External safety compressor
LP : Automatic reset Low Pressure pressostat
HP : Automatic reset High Pressure pressostat
C1 : M1 compressor condenser
RV : 4 way valve for cycle inversion
11.2.2.2. FAN MOTOR AND THEIR EQUIPMENT
MV : Treated air fan motor
TV : Auto-transformer
FV : MV motor internal safety device
C : MV motor condenser
11.2.2.3. WATER CIRCUIT
Y1 : Water circuit by-pass valve (not supplied)
FS : Flow switch
SEE APPENDIX
N 786
cooling only or heatpump
of the regulation board.
12
230V 50Hz +/- 10%