Unit Installation; Attachment To The Ground - Iom CWAR 01-N-3ALL Manuel D'installation Et De Maintenance

9.3. UNIT INSTALLATION

9.3.1. CABINET REMOVAL
When removing cabinet do not pull or lift it up by the discharge grilles, to avoid
No tools are required to remove the casing. You just have to lift it up slightly to release
the olive-shaped attachment studs from the buttonholes. Then pull the casing towards
the front.

9.3.2. ATTACHMENT TO THE GROUND

We recommend the use of an angle bracket to attach the
appliance to the wall.
any damages on articulated fasteners of the access doors.
Models with a frontal air intake are equipped with four height-adjustable feet to
facilitate levelling the appliance. We recommend that the appliances are installed
at a slight angle to favour condensate run-off.
171 330
9
8.40
330 171
2
1