Emptying The Dust Container - Grundig VCC 7670 A Mode D'emploi

INFORMATION
Switch off and unplug the appliance before
cleaning it.
Caution
Never use gasoline, solvent, abrasive cleaning
7
agents, metal objects or hard brushes to clean
the appliance.
Dust indicator
If the dust container is full or the hose or the tube
is blocked by a large item such as a sock and
thus the suction is prevented, the dust indicator
next to the on/off button lights red.
Caution
If the dust container is empty, this means that a
7
large item (such as a sock) is stuck in the hose
or the tube and thus the air flow is blocked. In
such cases, switch off the appliance and check
the components.
Emptying the dust container
1
P ress the dust container removal button
remove the dust container
dust container.
2
P ush the dust container removal latches lo-
cated at the back of the dust container
both sides.
– Open the dust container
empty the container.
3
W hen you have emptied dust, close the dust
container cover ; a click sound will be heard.
E
4
I nsert the dust container
tion.
__________________________________
to
B
and remove the
E
from
E
cover and
E
back into its loca-
E
Cleaning the cyclone separator
1
P ress the dust container removal button
remove the dust container.
2 P ress the opening button for the motor protec-
tion filter (MIF) housing
3 R emove the motor protection filter (MIF) lo-
cated inside.
4 A fter removing the motor protection filter, you
will see the metal handle on the cyclone sepa-
rator. Holding this handle, remove the cyclone
separator from the dust container
5
C lean the cyclone separator and the dust con-
tainer compartment with a soft brush and
E
wipe them with a damp cloth.
Caution
Cyclone separator should not be immersed in
7
water.
and
B
and open the cover.
H
.
E
ENGLISH 21