INFORMATION
Before cleaning your appliance, turn off and
unplug.
Caution
Never use gasoline, solvent, corrosives, metal
7
objects or hard brushes for cleaning your ap-
pliance.
Replacing the dust bag
When your dust bag is full, all icons on the
display and on the touch control panel
start to flash simultaneously. Replace the dust
bag.
1
Open the upper cover
ton for opening the dust container
2
Remove the dust bag from the bag holder by
pulling it from its tray.
3
Dispose the full dust bag.
4
Holding its tray, push the new dust bag into the
bag holder. Ensure that it is fully seated.
5
Close the upper cover
Caution
Do not force the upper cover
7
otherwise the plastic parts can be damaged.
Dust bags not purchased from authorized deal-
7
ers or services are not original. Such dust bags
have a lesser quality and they become torn in
a shorter period and render your appliance
inoperable. Faults caused by using unauthentic
dust bags are not covered by the scope of the
warranty.
___________________________________
will
A
by pressing the but-
G
H
.
of the appliance.
G
to close it,
G
Do not wash a dust bag.
7
Cleaning the filters
Motor protection
Sponge
filter
filter
After 5 dust bag replacements (this number varies
depending on the usage frequency and area),
clean the filters.
Caution
For drying filters, do not use appliances such
7
as hairdryers, stoves or other sources of hot air.
Do not mount back the filters before they are
7
dried properly; otherwise a smell of humidity
may disseminate on the air, water may splash
from the rear part or filters may get damaged.
Put the filters back to their original place when
7
they are dry.
Motor protection filter
1
Open the upper cover
ton for opening the dust container
2
Push the filter cover latches towards the arrow
direction shown to open up the filter lid.
3
Remove the sponge from its caging.
4
Shake off and rinse it with water. After rinsing,
gently squeeze the sponge.
HEPA
filter
by pressing the but-
G
.
H
19
ENGLISH