Sonnenkonig RHODOS Mode D'emploi page 48

3 Installation
EN
The base consists of two identical pieces. When using, please combine them in the
correct order; and please keep the packaging materials properly for use in storage.
• First combine the front and rear 2 bases.
• Use 4 self-tapping screws to lock the body and the base with the assembled
base.
4 Usage
• Remove the product from the packaging and attach the base plate.
• Connect the appliance to a socket with the rated power indicated on the rating
plate.
• Place the heater on a stable ground and connect the power supply.
• Rotate the knob to select the heating model and temperature.
• Turn the flame effect switch on appliance back to use flame effect light.
• When want to turn off the appliance, rotate the knob to 0 state.
Step 1 Step 2
48