GYS Powerduction 110LG Mode D'emploi page 12

Translation of the original instructions
Maintenance:
• If the power cable is damaged, it must be replaced by the
• Warning! Always disconnect from the mains before perform-
• Remove the casing on a regular basis, to remove any excess
• Do not use solvents or any agressive cleaning products.
• Clean the device's surfaces with a dry cloth.
Regulations:
• Device complies with europeans directives.
• The certificate of compliance is available on our website.
• EAC Conformity marking (Eurasian Economic Community).
• Equipment in compliance with British requirements. The British
• Equipment in conformity with Moroccan standards.
• The declaration C‫( م‬CMIM) of conformity is available on
Waste management:
• This product should be disposed of at an appropriate recycling
• The product's manufacturer contributes to the recycling of its
• This product should be recycled appropriately
GENERAL DESCRIPTION
The Powerduction Heat Controller is an intelligent box that acts like a thermostat on the Powerduction 110/160/220LG.
It regulates the temperature of the part to be heated between 80°C and 350°C.
POWERDUCTION CONNECTION
1. Disconnect the pedal from the Powerduction and then connect it to the Powerduction Heat Controller.
12
POWERDUCTION HEAT CONTROLLER
manufacturer, its after sales service or an equally qualified
person to prevent danger.
ing maintenance on the device. High Voltage and Currents
inside the machine.
dust. Take this opportunity to have the electrical connections
checked by a qualified person, with an insulated tool.
Declaration of Conformity is available on our website (see
home page).
our website (see cover page).
facility. Do not throw away in a domestic bin.
packaging by contributing to a global recycling system.
EN