Dismantling The Bike Carrier - Enduro SD260 Notice D'assemblage Et De Sécurité

Porte-vélos
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

WARNING!
Personal injury or material damage possible due to loss of the bike carrier
during the journey.
Riding with a bike carrier which is extended can result in detachment of
the carrier or the coupling.
Slide the carrier forwards before the start of the journey (see fig. 5 of
this chapter).
The sliding mechanism locks back (you hear two clicks) by sliding back
the entire bicycle carrier. Both levers are in the low position (see figure
6).
Check that the bike carrier is properly secured in this position.

DISMANTLING THE BIKE CARRIER

To dismantle the bike carrier, proceed in the reverse order to fitting:
Unlock the U-tube and rearlights and fold it down into the storage position.
Fold the bike carrier together.
Remove lighting connector from the car.
Release the quick-connector lever and pull the bike carrier of the towball.
The ingenious folding system makes it convenient to carry and to store.
63

Publicité

Table des Matières
loading

Table des Matières