Environmental Protection; Important - Worx WU430 Mode D'emploi

serviceable parts in your power tool.
Never use water or chemical cleaners to clean
your power tool. Wipe clean with a dry cloth.
Always store your power tool in a dry place.
Keep the motor ventilation slots clean. Keep all
working controls free of dust.
If you see some sparks flashing in the
ventilation slots, this is normal and will not
damage your power.
ENVIRONMENTAL
PROTECTION
Waste electrical products should not
be disposed of with household waste.
Please recycle where facilities exist.
Check with your local authorities or retailer for
recycling advice.
PLUG REPLACEMENT (UK &
IRELAND ONLY)
If you need to replace the fitted plug then
12
follow the instructions below.

IMPORTANT

The wires in the mains lead are colored in
accordance with the following code:
Blue - Neutral
Brown - Live
As the colors of the wires in the mains lead of
this appliance may not correspond with the
coloured markings identifying the terminals in
your plug, proceed as follows.The wire which
is coloured
blue must be connected to the terminal which
is marked with N.The wire which is coloured
brown must be connected to the terminal
which is marked with L.
Warning: Never connect live or neutral
wires to the earth terminal of the plug.
Only fit an approved BS1363/A plug and the
correct rated fuse.
Note: If a moulded plug is fitted and has to be
removed take great care in disposing of the
plug and severed cable, it must be destroyed
to prevent engaging into a socket.
Circular saw
13L-WU430-M-070305¸ÄFÓïCE´¦.indd 12
All manuals and user guides at all-guides.com
Connect
Blue to N
(neutral)
Outer sleeve
firmly clamped
13 Amp fuse approved
to BS1362
Brown L (live)
Cable grip
ENG
3/5/2007 5:02:59 PM