Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
6
h.
The Motor can now be reassembled. Slide the
Extension Damper back in place on the Damper Pins.
This should be done so the shaft on the Damper is
pointing inboard. Reinstall the two 5/16" E-clips.
7
i.
Replace the Right Sideplate.
j.
Replace the Left Sideplate.
k.
Replace the four sideplate Screws using a #2 or #3
Phillips Screw Driver.
7j
Left Sideplate
Left Sideplate
Screw
Screw
9 | minnkotamotors.com
Screw
Screw
E-clips
E-clips
7i
Screw
Screw
Damper Pins
Damper Pins
Extension Damper
Extension Damper
Screw
Screw
Right Sideplate
Right Sideplate
©2021 Johnson Outdoors Marine Electronics, Inc.
Publicité
Table des Matières
