MINN KOTA MKA-21 Mode D'emploi page 4

Installing the Outer Plate to a PowerDrive or Terrova
1
WARNING
Make sure that the Power Cables from the battery are
disconnected, or that the breaker, if equipped, is "off."
NOTICE:
A motor may weigh up to 65lbs. We
recommend having a second person help with
the installation.
a. Place the mount on an elevated, level surface such
as a workbench or the tailgate of a pickup. The
motor should be in the stowed position.
2
b. Remove the four sideplate screws using a #3 Phillips
screwdriver. Two of these screws will be located on
each side of the mount.
c. Remove the Right Sideplate.
d. Swing the Left Sideplate out and away from the
Base Extrusion. Removing the sideplates exposes
the Mounting Holes in the Base Extrusion.
2c
Mounting Mounting
Holes Holes
4 | minnkotamotors.com
Right Sideplate Right Sideplate
Power Cables Power Cables
Deployed Deployed
2d
Base Extrusion Base Extrusion
Left Sideplate Left Sideplate
Stowed Stowed
©2021 Johnson Outdoors Marine Electronics, Inc.