65 5550
POWER ON AND RESETTING THE
WRENCH
Long press
DE
After ☐☐☐☐ performed , original dial
EN
Usually press
reset the digital torque wrench before
using it. Notice to keep the wrench hori-
zontal and rest during reset process.
ATTENTION:
If an external force is applied to the
torque wrench during power-on/reset
or wake up period, an initial torque
offset will exist in the memory.
FR
POWER SAVING AND
AUTO POWER OFF
The wrench will decrease screen
The wrench will auto power off after
IT
While existing torque offset , auto
power off function is disabled.
Re – POWER ON
If the wrench does not function
ES
14
torque wrench.
gauge shows on display
brightness after about 30 seconds
idling for power saving. Appling force
again can wake screen up.
about 2 minutes idling.
Press
again can power on the
wrench .
CAUTIONS:
normally, remove battery then install it
and power on again.
to power on the digital
with buzzer beep to