Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Min-Max memory for system temperature
• Hi: displays the highest measured temperature
• Lo: displays the lowest measured temperature
Erase the memory:
- Press the "Mode/Enter" button until HI or Lo is displayed.
- Press the "Set" button and keep it pressed until "- - -"
is displayed.
- Then press the "Mode/Enter" button briefly.
It is recommended to erase the memory as soon as the unit starts
working under normal operating conditions.
4. Installation
Mount the temperature sensor to the G½ process connection.
5. Electrical connection
The unit must only be connected by an electrician.
The national and international regulations for the installation of
electrical equipment must be observed.
Voltage supply to EN50178, SELV, PELV.
Disconnect power before connecting the unit.
Wiring:
4: OUT1
2: OUT2
Core colours of ifm sockets:
1 = BN (brown), 2 = WH (white)
3 = BU (blue), 4 = BK (black)
Programming of complementary outputs:
output 1: = Hno, output 2: = Hnc,
SP1 = SP2 / rP1 = rP2.
16
1
BN
L +
2
WH
4
BK
3
BU
L
Publicité
Table des Matières
