Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Installation
Before mounting and removing the sensor, make sure that no
pressure is applied to the system.
Mount the pressure sensor on a G¼ process connection.
Electrical connection
The unit must be connected by a suitably qualified electrician.
The national and international regulations for the installation of
electrical equipment must be observed.
Voltage supply to EN50178, SELV, PELV.
The device shall be supplied from an isolating source and pro-
tected by an overcurrent device such that the limited voltage cir-
cuit requirements in accordance with UL 508 are met.
Disconnect power before connecting the unit as follows:
2 x p-switching
2: OUT2
4: OUT1
1 x p-switching / 1 x analogue
2: OUT2
4: OUT1
Core colours of ifm sockets:
1 = BN (brown), 2 = WH (white), 3 = BU (blue), 4 = BK (black).
22
1
BN
L +
2
WH
4
BK
3
BU
L
1
BN
L +
2
WH
4
BK
3
BU
L
2 x n-switching
1
2
4
2: OUT2
3
4: OUT1
1 x n-switching / 1 x analogue
1
2
4
3
2: OUT2
4: OUT1
BN
L +
WH
BK
BU
L
BN
L +
WH
BK
BU
L
Publicité
Table des Matières
