Technical Specifications - Alesis ELEVATE 6 Guide D'utilisation

User Guide (English)
Introduction
Box Contents
Elevate 6; Power Cable; User Guide; Safety & Warranty Manual
Support
For the latest information about this product (system requirements, compatibility information,
etc.) and product registration, visit alesis.com/elevate-6.
For additional product support, visit alesis.com/support.

Technical Specifications

Frequency Response
Frequency Range
Crossover Frequency
HF Trim
LF Trim
Low-Frequency Driver
High-Frequency Driver
Low-Frequency Amplifier
High-Frequency Amplifier
Input Sensitivity
Maximum Output
Input Impedance
Polarity
Dimensions
(width x depth x height)
Weight
(monitor only)
(dBSPL)
95
90
85
80
75
70
50
20
55 Hz – 30 kHz (+3 dB)
45 Hz – 35 KHz (-10 dB)
2.2 kHz
+2 dB, 0 dB, -2 dB above 3 kHz
+2 dB, 0 dB, -2 dB below 500 Hz
Magnetically shielded 6.5" (16.5 cm) woofer with a Kevlar cone and a
damped linear rubber surround
1" (2.5 cm) silk-dome tweeter
50 W Class AB
25 W Class AB
54 mV pink noise input produces 87 dBA output SPL at 1 meter with
volume control at maximum
104 dB SPL (continuous), 110 dB SPL (peak)
200 KΩ balanced, 100 KΩ unbalanced
Positive signal at + input produces outward LF cone displacement
8.5" x 10.3" x 15"
21.6 cm x 26.2 cm x 38.1 cm
16.6 lbs
7.53 kg
SPL vs. Frequency
100 200 500 1K
2K
Specifications subject to change without notice.
3
(Hz)
5K 10K 20K